Cummins Engine Drived Hydraulic DTH Rock Drilling Equipment for 40m
Depth Quarry and Mining JK580
JK580 hydraulic down-hole rock drill is a multi-functional drill
rig driven by internal combustion engine, the drilling power was
provided by hydraulic system except for impacting and the hole
cleaning wind.This mobile drilling rig is convenient and efficient
to operate. This drill rig is the best replacement for traditional
pneumatic drills in most operation. The drilling rig is compact in
structure, simple in operation, light in total weight. JK580
hydraulic crawler drilling rig is widely used for blast-hole
drilling in the mines and quarries.Jk580 rock blasting drilling
machine is also used for anchor in road, railway, power station,
civil engineering and building etc.
1: The Rugged track was driven by hydraulic motor with high
2: The feed and rotary head were driven by hydraulic motor,
therefore, the air and oil consumption and total drilling cost are
3: The hydraulic feed and rotary head put out the biggest feeding
force and largest rotary torque, which makes it more suitable for
operation in complex worksites.
4: The compressor equipped for the rig is smaller and cheaper than
that one the air rig equipped, along with the best
price-performance ratio than air rig.
5: The Hydraulic track oscillation makes it more suitable to drill
in any rough terrain.
6: The carriage with rollers provides for minimal wear to the drill
7: The Hydraulic auxiliary functions are easy and efficient for
guide extension, boom swing, boom lift, guide tilt and guide dump.
8: The diesel engine and main hydraulic parts adopt imported
products or famous domestic brand.
9: The special compensation device makes a full protection of drill
|4||Drilling Rod Diameter||mm||60,76,89|
|7||Max. Feed force||KN||30|
|8||Max. Lifting force||KN||30|
|9||Max. Feed Speed||M/min||15|
|10||Max. Lifting Speed||M/min||15|
|11||Max Swing of Boom||°||45° left / 45° right|
|12||Max Dump of Boom||°||up60 down20|
|13||Max Swing of Guide||°||30(L) / 91(R)|
|14||Max Dump of Guide||°||180|
|18||Compressor Pressure Required||M³/min||Φ≤115 11.3m2/min(1.4 Mpa)|
|Φ≤140 13m2/min(1.4 Mpa)|
|Φ≤165 17m2/min(1.4 Mpa)|
|Φ≤165 21m2/min(2.4 Mpa)|
|19||Max. Travel Speed||Km/h||2|
In our after sales service system, We establish perfect control
system strictly according to ISO-9000 series, in this system,
technology date and problem solve solution and preventive measures
will be provided in any maintain project, all the spare parts will
be used in new OEM products with installation instructions, packing
list, manufacturer's instruction, qualification and Warranty
We provide "one equipment & one case, endless service, namely
the after sales service begin from the order confirmation, last for
the working life of the equipment.