Rotary borehole drilling rig , 600m drilling capacity well drilling
CSD600 Multi-functional truck mounted water well drilling rig is a
efficient,multi-function full hydraulic water well drilling rig.It
is high efficiency because of having a larger torque of the
turntable and is mainly used for water well in industry and
agriculture, national defense building foundation, geological
exploration, geothermic well and other foundation working, it is
popular at home and abroad.
CWD600 truck mounted drilling rig can drilling in all kinds
formations by mud drilling in soft formation and air DTH hammer in
rock drilling,DTH Hammer is applied in rock drilling, slag is
discharged by air pressure and the offstage efficiency is ten times
than traditional rotary drilling.
CSD600 deep water well drilling rigs, in cutting drilling or rotary
drilling can be operated in unconsolidated layer, and the slag can
be discharged under by mud, the impact drilling operation can also
be adopted and slag can be discharged by pressure air, the
hydraulic water well drilling rig suitable for drilling complicated
1. The drilling rig can use air DTH Hammer drilling and mud
2. Centralized control console is suitable for each manipulation
and control. Rapid pulling and lifting reduce the auxiliary time
and enhance the work efficiency.
3. The truck chassis adopts the 8X4 special crane chassis of brand
Sinotruck Howo and the main drive system, the transfer case,
gearbox, double-winch unit, mud pump, turntable,drilling tower,
feed system are set up on the chassis.
4. It’s a hydraulicrotary drilling rig with directional
circulation. It is equipped with BW450/2A mud pump which adopts the
slurry as the washing fluid and can drill on clay, sand and rock if
it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine,132kw
Cummins engine drives the large displacement high pressure plunger
pump and it is characterized by powerful dynamic and stable
6. The rotary head,have two gear,rotation speed is 0-80 and160rpm
stepless adjustment and the rotary torque is 6500-13000Nm.
7. The pulling force can be regulated and controlled, which adapt
the machine to deep hole drilling.
8. It can set up a generator which is convenient to welding or
illuminate for work at night.
9. Main winch are available on the rig so it is high efficiency
when the rig drill on mud rock and on the weathering formation.
10. The main drive of rig is hydrulic and the four landing legs and
drilling tower are hydraulic controlled. Transfer case and mud pump
clutch system are also hydraulic operated.
11. Competitive in price, low cost of maintain.
|1||Geology drilled|| ||All kinds|
|2||Drilling Type|| ||DTH & Mud Rotary|
|3||Drill system and operation|| ||Hydraulic|
|6||Rotation Torque||Nm||6500 1st Gear|
|13000 2nd Ger|
|7||Rotation Speed||rpm||0-80 1st Gear|
|0-160 2nd Ger|
|8||Drill pipe diameter||mm||89/114|
|9||Drill pipe length||mm||4000/4500|
|11||Max. Lifting force||T||32|
|12||Lifting force of Main winch(Optional)||T||4|
|13||Lifting force of hoist||T||1.5|
|14||Length of steel wire rope(tool winch)||m||100|
|15||Lifting height of tool winch||m||8|
|16||Diesel Engine type||CUMMINS|
|17||Rated Horse power||Kw||132|
|19||Compressor Type||Rotary Screw/Movable|
|22||Manufacturer|| ||SINOTRUCK HOWO|
|25||Rated Horse power||kw||196|
|26||Discharge Standard|| ||EU-2|
|27||Drive type|| ||6*4|
|29||Steering wheel|| ||left/right(Optional)|
|34||Discharge pressure (Mpa)||Mpa||2-3|
|35||Suction tube diameter||mm||89|
|36||Discharge pipe diameter||mm||51|
|45||Foam pump|| ||Optional|
In our after sales service system, We establish perfect control
system strictly according to ISO-9000 series, in this system,
technology date and problem solve solution and preventive measures
will be provided in any maintain project, all the spare parts will
be used in new OEM products with installation instructions, packing
list, manufacturer's instruction, qualification and Warranty
We provide "one equipment & one case, endless service, namely
the after sales service begin from the order confirmation, last for
the working life of the equipment.