150m Small Water Well Rotary Drill Rig with Trailer TWD150
TWD150 combines an onboard power pack, drill pipe storage and foam
pump on a single axle trailer. This makes for a quick set up in
most locations and is an ideal multipurpose rig for many water well
TWD150 has mud pump built in this high head pump can drill deeper
faster than alternative skid mounted centrifugal mud pumps and
takes its power direct from the trailer power pack.
|Geology drilled||All kinds|
|Drill depth||0-150 m|
|Drilling Diameter||90-254mm(Mud drilling)|
|Drilling Diameter||90-254mm(DTH Drilling)|
|Drill system and operation||Hydraulic|
|Rig assembly||Main engine driven|
|Mobility||4 wheel tandem road trailer|
|Transportation||Towed by pickup or light truck|
|Drill pipe (diameter x length)||76/89 mm x 2 m|
|Top head drive by a hydraulic cylinder|
|Rotation torque||2250 N-m|
|Head travel||2.25 meter|
|Pull-up speed-slow feed||1.22 meter/min|
|Pull-up speed-rapid feed||12.26 meter/min|
|Pull-down speed-slow feed||0-1.88 meter/min|
|Pull-down speed-rapid feed||0- 16.90 meter/min|
|Drill pipe length||2000mm|
|Drill pipe diameter||76/89 mm|
|Thread||2 3/8 REG API Mod|
|Power pack speed||3000 rpm.|
|Load power pack||max. 47 hp.|
|Flow capacity||200 liter/min|
|Max. working pressure||40 bar|
|Hydraulic tank capacity||160 liter|
|2 front jacks and 2 rear jacks.||Hydraulic|
|Lubricator of venturi-type for down-the-hole drills.|
|Max. pressure||25 bar|
|Oil tank capacity||4 liter|
|Overall length||3500 mm|
|Overall width||1800 mm|
|Overall height||1900 mm|
|Overall height||1901 mm|
Q: Are you original manufacturer?
A: Yes, we JCDRILL is a official leading manufacture in drilling
machinery in China and we have
the whole series products you need.
Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required
in advance, and 70% balance shall be settled before shipment.On L/C
term, a 100% irrevocable L/C without "soft clauses" can be
Q: How long will the delivery time take?
A: Normally mud pump products will take about 3-15 days to produce
the ordered machines. Most of the time, we can have an immediate
delivery of our regular machines in 15 days.
Q: How about after sales service?
A: 365×24 Year-round Service We are committed to year-round 24-hour
service even during holidays, in line with our policy of always
providing "a response within 15 minutes and job completion within
Q: Spare Parts When You Need Them
A:We have spare parts centers across continents that stock
specialist spare parts. We promise that spare parts will be
delivered within 72 hours or no more than one week.